07-30-2010, 11:09 AM
|
#26 |
|
M3MB3R
Join Date: May 2010
Location: Mahwah, New Jersey
Posts: 633
|
eventually it would get boring, but it wont be for a while
|
|
|
|
07-30-2010, 11:45 AM
|
#27 |
|
M3MB3R
Join Date: Jul 2010
Location: 30 min away from detroit
Posts: 39
|
so hows 2' high, 8'wide, 2' decks, 5'6 tranny, Good metal coping, and a masonite surface sound too you guys?? When I used to skate, thats what I dreamed of lol.
|
|
|
|
|
07-30-2010, 11:46 AM
|
#28 |
|
M3MB3R
Join Date: May 2010
Location: Mahwah, New Jersey
Posts: 633
|
i think 2 feet is a little short go for 3 feet and other than that it sounds sick
|
|
|
|
|
07-30-2010, 11:50 AM
|
#29 |
|
M3MB3R
Join Date: Jul 2010
Location: 30 min away from detroit
Posts: 39
|
cant, roof clearence is 8'4"
|
|
|
|
|
07-30-2010, 01:44 PM
|
#30 |
|
M3MB3R
Join Date: Jul 2010
Location: 30 min away from detroit
Posts: 39
|
Good news and bad news, I just got a 4 year old A1 off a friend of mine for free, I bolted the headtube too the deck, I just mastered Tailwhips, 180's, 360s, and barspins. Badnews, I did a tailwhip 180 and the backwheel's urethane ripped, and now when ever I land on that section it pops off the wheel, anybody know how to fix it??
|
|
|
|
|
07-30-2010, 01:54 PM
|
#31 | |
|
M3MB3R
Join Date: Jan 2010
Location: arizona
Posts: 660
|
no way to fix, its dehubbed
__________________
Quote:
|
|
|
|
|
|
07-30-2010, 01:57 PM
|
#32 |
|
M3MB3R
Join Date: Jul 2010
Location: 30 min away from detroit
Posts: 39
|
Okay, I replaced the front wheel with the rear wheel, and etc. It works fine now, is this why I should have put hot glue in it??
|
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
